| After launching the FN5C Brass Heating Manifold last year, Rifeng
develops a new series heating manifold--the FN15 Stainless Steel Heating
Manifold these days. |
| |
| FN15 Stainless Steel manifolds are sold in 1 to 12-branch pairs for
easy assembly in the field. Manifold sections are easily connected
together, if more circuits are required. Simply thread two sections
together with the use of a manifold coupling and tighten. Make sure the
gasket is installed prior to assembly. |
| |
| Features & Benefits |
|
Flexible, modular and singular design system
Easy-to-assemble construction
Precise flow control and balancing
Fittings for both PEX and Multilayer Pipe
Control for the dominant heating systems like hydronic floor heating, fan coil heating or baseboard heating
No sealant, no Teflon |
 | |
|
 |
| Tchnical Data: |
1. Standard: CJ/T 251-2007, GB/T1220-92
2. Material Mainfold body:
0Cr18Ni9(SUS304) Port connection: HPb59-1 Sealed: EPDM Flowmeter: ABS, Nylon, PC, Stainless
3. Technical data:
Applicable
medium: hot and cold water, mixture of water and anti-freeze additive
Nominal pressure: 1.0MP Applicable medium temperature: 0-85OC Max
temperature: 90OC Flow adjust range: 0-5L/min, Kvs=1.10 Main in/outlet
size: 1" Sub in/outlet size: 3/4" Sub in/outlet size: 50mm
4. Accessories:
Ball valve, Drainage, Drainage (manual air vent) |
| |
| Test: |
1. Air tightness test, under 1.0MPa pressure
2. Mainfold screw torque force test: 125N
3. Static internal pressure test: 1.1MPa, 90OC, 1hour
4. Blasting test: 2.4MPa, 23OC,2min | |
